December 7, 2005

This directory or media contains the Ver 1.1a of the OCS Web Server Demo.


FILE                    DESCRIPTION

readme.txt              This Document
SUP0740-05.pdf          Ethernet User Manual Release 5

OCS451 Web Demo.csp     OCS Web Demo Ladder Program for OCS451
OCS551 Web Demo.csp     OCS Web Demo Ladder Program for OCS551
OCS651 Web Demo.csp     OCS Web Demo Ladder Program for OCS651

NX221 Web Demo.csp      OCS Web Demo Ladder Program for NX221
NX251 Web Demo.csp      OCS Web Demo Ladder Program for NX251

QX451 Web Demo.csp      QX Web Demo Ladder Program for QX451
QX551 Web Demo.csp      QX Web Demo Ladder Program for QX551
QX651 Web Demo.csp      QX Web Demo Ladder Program for QX651

QX451BP Web Demo.csp    QX Web Demo Ladder Program for QX451BP
QX551BP Web Demo.csp    QX Web Demo Ladder Program for QX551BP
QX651BP Web Demo.csp    QX Web Demo Ladder Program for QX651BP

DemoMain.htm            Main Frameset (Home Page)
DemoLogo.htm            Main Title Page
DemoLink.htm            Link Page
DemoEasy.htm            OCS Register Read/Write Simple Demo
DemoRd.htm              OCS Register Read Table Demo
DemoWr.htm              OCS Register Write Table Demo
DemoRdWr.htm            OCS Register Read/Write Table Demo
DemoImg.htm             OCS Screen Capture/Display Demo (Unscaled)
DemoImg2.htm            OCS Screen Capture/Display Demo (Scaled)


INSTRUCTIONS FOR RUNNING THE OCS WEB SERVER DEMO:

1.  Using the OCS, NX or QX target's System Menu, confirm that firmware Ver
    11.53 or later has been loaded, and set the target's Network ID to 1.

2.  Using Cscape, load the appropriate .CSP file into the target OCS or NX
    and then put it in RUN mode.

3.  On the OCS, NX or QX user screen, set the IP Address as appropriate for
    your network.  For NX221 targets, the IP Address is not on the first
    screen, so use the two softkeys on the right, to find the correct screen.

4.  Connect your PC to the target OCS or NX either directly (using a crossover
    CAT5 cable) or via a hub, switch or router.

5.  Copy all the .HTM files onto the target OCS, NX or QX Compact Flash Card.

6.  Start a web browser and enter the following URL:

        http://xxx.xxx.xxx.xxx/DemoMain.htm

    where xxx.xxx.xxx.xxx is the IP address set up in step 3 above.
