e-Elit - juhtiv
elektri- ja automaatikatarvikute
online hulgimüük
Klienditeenindus E-R 9-17
Helista: +372 622 9119
Est En
Elit shopping basket
Tooteid: Maksumus:
0
€ 0,00
    search
Logi sisse
Kasutajatunnus/e-post:

Parool:

Näita kõiki kategooriaid
Ei leidnud sobilikku toodet?
Head pakkumised!
Hazloc Beacon, xenon 5J strobe, -4..131°F, PPS glass filled plastic/glass, ss304 mounting bracket, Vitongasket, ½-in. NPT conduit, 24VDC, IP66^NEMA4/4X/13, Allen-Bradley, red
Hazloc Beacon, xenon 5J strobe, -4..131°F, PPS glass filled plastic/glass, ss304 mounting bracket, Vitongasket, ½-in. NPT conduit, 24VDC, IP66^NEMA4/4X/13, Allen-Bradley, red



Näita km-ga hindu
Air/gas ratio control unit GIK 40R02-5B, f. High/Low/Off control, internal thread DN40, w. bypass screw (GIK 40-50:5mm), inlet Pu max.= 0,20bar, pressure test point at the outlet, dp max=100mbar, KromSchröder
Pilt on illustreeriv
Air/gas ratio control unit GIK 40R02-5B, f. High/Low/Off control, internal thread DN40, w. bypass screw (GIK 40-50:5mm), inlet Pu max.= 0,20bar, pressure test point at the outlet, dp max=100mbar, KromSchröder
Kood: 03155147
Hind
€ 304,00  /tk
(€ 364,80 /tk KM-ga)
Tootja :
Saadavus:
21 päeva
Kaal:
0.1234 kg/tk
Kogus (tk):
Plus sign Minus sign
 

 

Air/gas ratio control unit GIK 40R02-5B, f. High/Low/Off control, internal thread DN40, w. bypass screw (GIK 40-50:5mm), inlet Pu max.= 0,20bar, pressure test point at the outlet, dp max=100mbar, KromSchröder

  • To maintain a constant gas/air mixture
  • For continuous and staged burner control
  • Design with inlet pressure compensation diaphragm ensures high control accuracy
  • Wide control range
  • EC type-tested and certified
  • Certified by Gosstandart pursuant to GOST-TR
Air/gas ratio controls GIK with inlet pressure compensation diaphragm and zero shut-off serve to maintain a constant gas/air ratio and to control the gas pressure upstream of gas burners in systems without preheated combustion air. For use in gas control lines in all sectors of the iron, steel, glass and ceramics industries, as well as in commercial heat generation, such as the packaging, paper and foodstuffs industries.
Air/gas ratio control GIK is actuated by the air line pressure. The valve disc is lifted from the valve seat and the gas flows into the regulator outlet area via the open valve seat. The outlet pressure is applied to the space above the working diaphragm via the impulse line. The outlet pressure is controlled in a ratio of 1:1 to the air control pressure. The inlet pressure compensation diaphragm ensures high control accuracy. The burner capacity can be adjusted using the air control valve. Furnace pressure fluctuations have the same effect on the gas and air throughput so that the gas/air mixture will remain unchanged.
The spring can be used for compensating the weight of the measuring unit. In the low-fire range, the gas/air mixture can be set by adjusting the spring. For staged control, the spring is decompressed at the factory in such a way that the low-fire rate only flows through the bypass.

Adjustment at high-fire rate is carried out using restrictors or valves on the burner. The zero shut-off prevents an increase in the outlet pressure when the consumer is switched off. Test nipples have been installed to measure the static inlet, outlet and control pressures.
 
 
Elit OÜ | e-post: elit@elit.ee | +372 622 9119 | 2016 ©


 
X
 
X