|
|
|
|
Pilt on illustreeriv
|
Thermocouple Converter KFD0-TT-Ex1, 1-ch., input TC, output 4..20mA, DIP switch selectable ranges, 12..35VDC (loop powered) Kood:
043692
Hind (indikatiivne)
€ 387,00
/tk
(€ 479,88 /tk KM-ga)
Tootja
:
|
Saadavus:
21 päeva
|
Kaal:
0.1575 kg/tk
|
Maht:
0.0003 m3/tk
|
|
|
|
|
Thermocouple Converter KFD0-TT-Ex1, 1-ch., input TC, output 4..20mA, DIP switch selectable ranges, 12..35VDC (loop powered), Pepperl+FuchsThermocouple Converter KFD0-TT-Ex1
- 1-channel isolated barrier
- 24 V DC supply (loop powered)
- Thermocouple input
- Output 4 mA ... 20 mA
- Internal cold junction compensation
- Sensor breakage detection
- DIP switch selectable ranges
Datasheet excerpt: Technical data of KFD0-TT-Ex1
| General specifications |
| Signal type | Analog input |
| Supply |
| Rated voltage | 12 ... 35 V DC loop powered |
| Power dissipation | 0.4 W |
| Input |
| Connection side | field side |
| Connection | terminals 1+, 2-, 3- thermocouple E, J, K, N, R, S or T, cold junction referenced to 0 °C (32 °F) |
| Lead resistance | max. 100 Ω per line |
| Current | lead monitoring ON: ≤ 15 nA; OFF: ≤ 1 nA |
| Output |
| Connection side | control side |
| Connection | terminals 9+, 8- |
| Load | (U -12 V) / 0.02 A |
| Current output | 4 ... 20 mA , limited to ≤ 35 mA |
| Fault signal | downscaling ≤ 3 mA , upscaling ≥ 22 mA |
| Transfer characteristics |
| Measurement range | span 4 ... 100 mV, zero point -12 ... 60 mV , both adjustable |
| Characteristic curve | the output voltage is linearly proportionate to the input voltage (not to temperature) |
| Rise time | 250 ms |
| Indicators/settings |
| Control elements | DIP-switch
rotary switch |
| Configuration | via DIP switches
via rotary switch |
| Labeling | space for labeling at the front |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
| Insulation coordination | EN 50178 |
| Galvanic isolation | EN 50178 |
| Electromagnetic compatibility | NE 21 |
| Degree of protection | IEC 60529 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 150 g |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
| EU-Type Examination Certificate | ZELM 00 ATEX 0035 |
| Marking | II (1)GD [EEx ia] IIC |
| Certificate | TÜV 01 ATEX 1777 X |
| Marking | II 3G Ex nA II T4 |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| International approvals |
| CSA approval | |
| Control drawing | 116-0132 |
|
|
|
|
|
