|
|
|
Pilt on illustreeriv
|
Releeliides TRS, 2CO 8A 250V, cv 48VUC, LED, rectifier, W12.8mm, Weidmüller Kood:
1123510000
Hind
€ 168,00
/pk
(€ 204,96 /pk KM-ga)
Package 10tk, unit price
16.8EUR/tk
Tootja
:
|
Saadavus:
21 päeva
|
Kaal:
0.0609 kg/tk
|
Maht:
0.0001 m3/tk
|
|
|
|
|
Relay Coupler TRS, 2CO 8A 250V, cv 48VUC, LED, rectifier, W12.8mm, Weidmüller
General ordering data
| Version |
TERMSERIES, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 48 V UC ±10 %, Continuous current: 8 A, Screw connection |
| Order No. |
1123510000 |
| Type |
TRS 48VUC 2CO |
| GTIN (EAN) |
4032248905829 |
| Qty. |
10 pc(s). |
| Availability |
Delivery date on request
|
Dimensions and weights
| Depth |
87.8 mm |
| Depth (inches) |
3.457 inch |
| Height |
89.6 mm |
| Height (inches) |
3.528 inch |
| Net weight |
57 g |
| Width |
12.8 mm |
| Width (inches) |
0.504 inch |
Temperatures
| Storage temperature |
-40 °C...85 °C |
| Operating temperature |
-40 °C...60 °C |
| Humidity |
5-95% relative humidity, Tu = 40°C, without condensation |
Environmental Product Compliance
| REACH SVHC |
Lead 7439-92-1 |
Rated data UL
| Operating altitude |
≤ 2000 m, above sea level |
| Ambient temperature (operational), max. |
60 °C |
| Connection cross-section AWG, min. |
AWG 26 |
| Connection cross-section AWG, max. |
AWG 14 |
| Type of conductor |
rigid copper conductor, flexible copper conductor |
| Tightening torque, max. |
0.4 Nm |
| Pollution severity level |
2 |
Control side
| Coil voltage of the replacement relay |
48 V DC |
| Coil voltage of the replacement relay deviating from the rated control voltage |
Yes |
| Power rating |
340 mW / 0.4 VA |
| Protective circuit |
Rectifier |
| Pull-in/drop-out current, typ. |
6 mA / 3 mA AC
5 mA / 1.5 mA DC |
| Pull-in/drop-out voltage, typ. |
29 V / 11 V AC
33 V / 11 V DC |
| Rated control voltage |
48 V UC ± 10 % |
| Rated current AC |
9 mA |
| Rated current DC |
7 mA |
| Status indicator |
Green LED |
Load side
| AC switching capacity (resistive), max. |
2000 VA |
| Continuous current |
8 A |
| DC switching capacity (resistive), max. |
192 W @ 24 V |
| Inrush current |
15 A / 4 s |
| Max. switching frequency at rated load |
0.1 Hz |
| Max. switching voltage, DC |
250 V |
| Min. switching power |
1 mA @ 24 V, 10 mA @ 10 V, 100 mA @ 5 V |
| Rated switching voltage |
250 V AC |
| Switch-off delay |
≤ 7 ms |
| Switch-on delay |
≤ 11 ms |
Contact data
| Contact type |
2 CO contact (AgNi) |
| Mechanical service life |
30 x 106 switching cycles |
General data
| Rail |
TS 35 |
| Test button |
No |
| Mechanical switch position indicator |
No |
| Colour |
black |
| UL94 flammability rating component |
| Component |
Housing |
| UL94 flammability rating |
V-0 |
| Component |
Retaining clip |
| UL94 flammability rating |
V-0 |
|
|
Insulation coordination
| Creepage and clearance distance input – output |
≥ 6 mm |
| Dielectric strength of neighbouring contacts |
2.5 kVeff / 1 Min. |
| Dielectric strength of open contact |
1 kVeff / 1 min |
| Dielectric strength to mounting rail |
4 kVeff / 1 Min. |
| Dielectric strength, Input/Output |
3.51 kVeff /1 min. |
| Impulse withstand voltage |
6 kV (1.2/50 µs) |
| Pollution severity |
2 |
| Protection degree |
IP20 |
| Rated voltage |
300 V |
| Surge voltage category |
III |
| Type of isolation at input and output |
reinforced insulation |
| Type of isolation at neighbouring contacts |
Basic insulation |
Further details of approvals / standards
| Standards |
EN 50178, EN 55011, EN 61000-6-1, 2, 4 |
| Certificate No. (DNVGL) |
TAA00001E5 |
| Certificate no. (cULus) |
E141197 |
Connection data
| Wire connection method |
Screw connection |
| Stripping length, rated connection |
8 mm |
| Tightening torque, max. |
0.4 Nm |
| Clamping range, rated connection |
1.5 mm² |
| Clamping range, min. |
0.14 mm² |
| Clamping range, max. |
2.5 mm² |
| Wire connection cross section AWG, min. |
AWG 26 |
| Wire connection cross section AWG, max. |
AWG 14 |
| Wire cross-section, solid, min. |
0.14 mm² |
| Wire cross-section, solid, max. |
2.5 mm² |
| Wire cross-section, solid, min. (AWG) |
AWG 26 |
| Wire cross-section, solid, max. (AWG) |
AWG 14 |
| Wire connection cross section, finely stranded, min. |
0.14 mm² |
| Wire connection cross section, finely stranded, max. |
2.5 mm² |
| Wire cross-section, finely stranded, min. (AWG) |
AWG 26 |
| Wire cross-section, finely stranded, max. (AWG) |
AWG 14 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. |
0.25 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. |
2.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. |
0.25 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. |
2.5 mm² |
| Wire connection cross section, finely stranded, two clampable wires, min. |
0.5 mm² |
| Wire cross-section, finely stranded, two clampable wires, max. |
1 mm² |
| Twin wire-end ferrules, min. |
0.5 mm² |
| Twin wire-end ferrules, max. |
1 mm² |
| Blade size |
size PH0 |
| Gauge to IEC 60947-1 |
A1, B1 |
Downloads
| Approval/Certificate/Document of Conformity |
EU Konformitätserklärung / EU Declaration of Conformity
|
| Engineering Data |
STEP
|
| Engineering Data |
EPLAN, WSCAD, Zuken E3.S
|
| CADENAS eCATALOG |
Cax data
|
| User Documentation |
Beipackzettel / Package Insert – multilingual
|
Classifications
| ETIM 6.0 |
EC001437 |
| ETIM 7.0 |
EC001437 |
| ECLASS 9.0 |
27-37-16-01 |
| ECLASS 9.1 |
27-37-16-01 |
| ECLASS 10.0 |
27-37-16-01 |
| ECLASS 11.0 |
27-37-16-01 |
Approvals
| Approvals |
|
| ROHS |
Conform |
| UL File Number Search |
E141197
|
|
|
File description
|
File type
|
Download link
|
|
|
|
|
|
|
|
|
|
|
