e-Elit - juhtiv
elektri- ja automaatikatarvikute
online hulgimüük

Klienditeenindus E-R 9-17
Helista: +372 622 9119

	Tooteid:	Maksumus:
	0	€ 0,00

Logi sisse

Näita kõiki kategooriaid

Ei leidnud sobilikku toodet?

Head pakkumised!

HART Connection Cable K-HM26, connection cable for KF*-HM*-16 to termination board, 1x IDC female connector, 26pin flat cable, L1m

Tootepuu > Kilbitarvikud, kilbid, kapid > Kontaktorid, releed, aegreleed > Fieldbus Couplers, IO Modules, Network Switches

Pilt on illustreeriv

Remote I/O Module UR20-4AI-UI-16-DIAG, analog input, 4-ch., current/voltage, push-in

Kood: 1315690000

Hind

€ 548,40 /tk
(€ 680,02 /tk KM-ga)

Tootja :

Weidmüller

Saadavus:

28 päeva

Kaal:

0.104 kg/tk

Maht:

0.0001 m3/tk

Remote I/O module UR20-4AI-UI-16-DIAG, analog input, 4-ch., current/voltage, Push In, Weidmüller

Inputs can be parameterised; up to 3-wire + FE; accuracy 0.1% FSR

Analogue input modules of the u-remote system are available in many variants with different resolutions and wiring solutions. Variants are available with 12- and 16-bit resolution, which record up to 4 analogue sensors with +/-10 V, +/-5 V, 0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 mA or 4...20 mA with maximum accuracy. Each plug-in connector can optionally connect sensors with 2- or 3- wire technology. The parameters for the measurement range can be individually set for each channel. In addition, each channel has its own status LED. A special variant for Weidmüller interface units enables current measurements with 16-bit resolution and maximum accuracy for 8 sensors at a time (0...20 mA or 4...20 mA).

The module electronics supply the connected sensors with power from the input current path (U_IN).

Technical data:
Dimensions and weights:	Width: 11.5 mm Height: 120 mm Depth: 76 mm Mounting dimension - height: 128 mm Net weight: 89 g
Temperatures:
Operating temperature:	-20°C...60 °C
Storage temperature:	-40 °C...85 °C
Connection data:
Wire connection cross section, finely stranded, max.:	1.5 mm²
Wire connection cross-section, finely stranded, min.:	0.14 mm²
Wire cross-section, finely stranded, max. (AWG):	AWG 16
Wire cross-section, finely stranded, min. (AWG):	AWG 26
Wire cross-section, solid, max.:	1.5 mm²
Wire cross-section, solid, max. (AWG):	AWG 16
Wire cross-section, solid, min.:	0.14 mm²
Wire cross-section, solid, min. (AWG):	AWG 26
Power supply:
Current consumption from I_IN (power segment of the field bus coupler), typ. [mA]:	8 mA
Feed current for I_IN (input current path) [mA], max.:	25 mA + sensor feed
Supply voltage:	24 V DC +20%/ -15%, via the system bus

Seotud tooted

€ 3,30 /tk

€ 15,60 /tk

Remote I/O module UR20-4AI-UI-16-DIAG, analog input, 4-ch., current/voltage, Push In, Weidmüller

Technical data:

Temperatures:

Connection data:

Power supply: