€ 128,00  /tk
(€ 158,72 /tk KM-ga)

Overview

The DEVIreg™ 330 is an electronic thermostat for installation in electrical cabinets on a DIN rail. It is primarily used for controlling a lower temperature range, such as frost protection.

The thermostat must be installed via an all-pole disconnection switch. An LED indicates the current operating mode: heating, standby or fault.

A wire sensor or outdoor air sensor is used to measure and control the desired temperature. The temperature setting can be adjusted from -10..10°C.

Benefits

For DIN rail mounting

Low temperature area

Low standby consumption

LED indicator

Standard Compliance

EN/IEC 60730-1 general, EN/IEC 60730-2-9 thermostat

Specification

Operation Voltage	220..240VAC 50/60Hz
Standby Power Consumption	Max. 0.25W
Resistive Load	Max. 16A 3680W 230VAC
Inductive Load	Cos φ = 0.3, max. 1A
Sensing Unit	NTC 15kΩ at 25°C
Hysteresis	±0.2°C
Ambient Temperature	-10..50°C
Lowering in Economy Periods	5°C
Temperature Range	-10..10°C
Cable Specification Max.	1x4mm² or 2x2.5mm²
Ball Pressure Test Temperature	75°C
Pollution Degree	2, domestic use
Controller Type	1C
Storage Temperature	-20..65°C
IP Class	IP20
Protection Class	Class II
Dimensions HxWxD	85x36x58mm