|
|
|
Pilt on illustreeriv
|
Simatic S7-1500, F Digital Input Module, F-DI 16x 24VDC PROFIsafe, W35mm, up to PL E (ISO 13849-1)/ SIL 3 (IEC 61508), Siemens Kood:
6ES7526-1BH00-0AB0
Hind (indikatiivne)
€ 874,70
/tk
(€ 1 067,13 /tk KM-ga)
Tootja
:
Saadavus:
küsi tarneaega
|
Kaal:
0.0945 kg/tk
|
Maht:
0.0002 m3/tk
|
|
|
|
|
Simatic S7-1500, F Digital Input Module, F-DI 16x 24VDC PROFIsafe, W35mm, up to PL E (ISO 13849-1)/ SIL 3 (IEC 61508), SiemensSIMATIC S7-1500, F digital input module, F-DI 16x 24 V DC PROFIsafe; 35 mm width; up to PL E (ISO 13849-1)/ SIL 3 (IEC 61508)
General information |
Product type designation |
F-DI 16x24VDC |
Firmware version |
|
● FW update possible |
Yes |
Product function |
● I&M data |
Yes; I&M0 to I&M3 |
Engineering with |
● STEP 7 TIA Portal configurable/integrated as of version |
V13 SP1 with HSP 0086 |
Operating mode |
● DI |
Yes |
Supply voltage |
Type of supply voltage |
24 V DC |
Rated value (DC) |
24 V |
permissible range, lower limit (DC) |
19.2 V |
permissible range, upper limit (DC) |
28.8 V |
Reverse polarity protection |
Yes |
Input current |
Current consumption (rated value) |
50 mA |
Encoder supply |
Number of outputs |
4 |
Short-circuit protection |
Yes; Electronic (response threshold 0.7 A to 1.8 A) |
24 V encoder supply |
● 24 V |
Yes; min. L+ (-1.5 V) |
● Short-circuit protection |
Yes |
● Output current, max. |
300 mA; Max. 100 mA when mounted vertically |
Power |
Power available from the backplane bus |
0.9 W |
Power loss |
Power loss, typ. |
4.6 W |
Address area |
Address space per module |
● Address space per module, max. |
9 byte |
Hardware configuration |
Automatic encoding |
Yes |
● Electronic coding element type F |
Yes |
Digital inputs |
Number of digital inputs |
16 |
Source/sink input |
Yes; P-reading |
Input characteristic curve in accordance with IEC 61131, type 1 |
Yes |
Input voltage |
● Type of input voltage |
DC |
● Rated value (DC) |
24 V |
● for signal "0" |
-30 to +5V |
● for signal "1" |
+15 to +30V |
Input current |
● for signal "1", typ. |
3.7 mA |
Input delay (for rated value of input voltage) |
for standard inputs |
— parameterizable |
Yes |
— at "0" to "1", min. |
0.4 ms |
— at "0" to "1", max. |
20 ms |
— at "1" to "0", min. |
0.4 ms |
— at "1" to "0", max. |
20 ms |
Cable length |
● shielded, max. |
1 000 m |
● unshielded, max. |
500 m |
Interrupts/diagnostics/status information |
Diagnostics function |
Yes |
Alarms |
● Diagnostic alarm |
Yes |
● Hardware interrupt |
No |
Diagnostic messages |
● Monitoring the supply voltage |
Yes |
● Wire-break |
No |
● Short-circuit |
Yes |
● Group error |
Yes |
Diagnostics indication LED |
● RUN LED |
Yes; Green LED |
● ERROR LED |
Yes; Red LED |
● Channel status display |
Yes; Green LED |
● for channel diagnostics |
Yes; Red LED |
● for module diagnostics |
Yes; Red LED |
Potential separation |
Potential separation channels |
● between the channels and backplane bus |
Yes |
Isolation |
Isolation tested with |
707 V DC (type test) |
Standards, approvals, certificates |
Highest safety class achievable in safety mode |
● Performance level according to ISO 13849-1 |
PLe |
● SIL acc. to IEC 61508 |
SIL 3 |
Probability of failure (for service life of 20 years and repair time of 100 hours) |
— Low demand mode: PFDavg in accordance with SIL3 |
< 5.00E-05 |
— High demand/continuous mode: PFH in accordance with SIL3 |
< 1.00E-09 1/h |
Ambient conditions |
Ambient temperature during operation |
● horizontal installation, min. |
0 °C |
● horizontal installation, max. |
60 °C |
● vertical installation, min. |
0 °C |
● vertical installation, max. |
40 °C |
Dimensions |
Width |
35 mm |
Height |
147 mm |
Depth |
129 mm |
Weights |
Weight, approx. |
280 g |
last modified: |
11/10/2018 |
|
File description
|
File type
|
Download link
|
|
|
|
|
|
|
|
|