|
|
|
Pilt on illustreeriv
|
LED toiteplokk LPV, input 90..264VAC| 127..370VDC, 102W 8.5A 12VDC, -30..70°C, cl.2, plastic Kood:
LPV-100-12
Hind
€ 36,30
/tk
(€ 45,01 /tk KM-ga)
Tootja
:
|
Saadavus:
Laos
|
Kaal:
0.68 kg/tk
|
Maht:
0.0004 m3/tk
|
Hulgipakendi kogus:
3tk
|
|
|
|
LED Power Supply 100W 8,5A 12V IP67
Features
Constant voltage design
Universal AC input / Full range
Fully encapsulated with IP67 level (Note.8)
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Fully isolated plastic case
Cooling by free air convection
100% full load burn-in test
Low cost, high reliability
Suitable for LED lighting and moving sign applications(Note 7.)
2 years warranty
IP67
CE
|
OUTPUT
DC Voltage |
12V |
| Rated current |
8.5A |
| Current range |
0 ~ 8.5A |
| Rated power |
102W |
| Ripple & Noise (max.) Note.2 |
120mVp-p |
| Voltage tolerance Note.3 |
±5.0% |
| Line regulation |
±1.0% |
| Load regulation |
±2.0% |
| Setup, rise time Note.6 |
2000ms, 25ms/ 230VAC
2000ms, 25ms/115VAC |
| Hold up time (typ.) |
50ms/230VAC 14ms/115VAC at full load |
| |
|
INPUT
Voltage range Note.4 |
90 ~ 264VAC 127 ~370VDC |
| Frequency range |
47 ~ 63 Hz |
| Effiency (typ.) |
85% |
| AC current |
2.2A/230VAC 1.2A/230VAC |
| Inrush current (max.) |
cold start 75A 230VAC |
| Leakage current |
0.25mA/240VAC |
| |
|
PROTECTION
Overload |
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed |
| Over voltage |
13.8 ~ 16.2V
Protection type : Shut down o/p voltage, re-power on to recover |
| |
|
ENVIRONMENT
Working temperature |
-25° ~ +70°C (Refer to "Derating Curve") |
| Working humidity |
20 ~ 90% RH non-condensing |
| Storage temp., humidity |
-40 ~ +80°C, 10 ~ 95% RH |
| Temp. coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10 min./1 cycle, period for 60min. each along X, Y, Z axes |
SAFETY & EMC
Safety standards |
IP67 approved; Design refer to TUV EN60950-1 |
| Withstand voltage |
I/P-O/P: 3VAC |
| Isolation resistance |
I/P-O/P: &100M Ohms / 500VDC / 25°C / 70% RH |
| EMC emission |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A(≤80% load), EN61000-3-3 |
| EMC immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A |
OTHERS
MTBF |
703Khrs min. MIL-HDBK-217F (25°C) |
| Dimension |
190*52*37mm (L*W*H) |
| Packing |
0.63Kg;20pcs/13.6Kg/0.55CUFT |
NOTE |
- All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12“ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- Tolerance : includes set up tolerance, line regulation and load regulation.
- Derating may be needed under low input voltage. Please check the static characteristics for more details.
- The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
- Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
- The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.
- . Suitable for indoor use or outdoor use without direct sunlight exposure.
|
|
File description
|
File type
|
Download link
|
|
|
|
|
|
Product data sheet
|
PDF
|
Download link
|
|
|
|
|
Seotud tooted
|
|
|
|
|
LED toiteplokk LPV, input 90..264VAC| 127..370VDC, 36W 3A 12VDC, -30..70°C, cl.2, IP67, plastic
|
LED toiteplokk LPV, input 90..264VAC| 127..370VDC, 60W 5A 12VDC, -30..70°C, cl.2, IP67, plastic
|
|
|
€ 21,10 /tk
|
€ 22,60 /tk
|
|
|
