Elit logo e-Elit - juhtiv
elektri- ja automaatikatarvikute
online hulgimüük
Klienditeenindus E-R 9-17
Helista: +372 622 9119
Est En
Elit shopping basket
Tooteid: Maksumus:
0
€ 0,00
    search
Logi sisse
Kasutajatunnus/e-post:

Parool:

Näita kõiki kategooriaid
Ei leidnud sobilikku toodet?
Head pakkumised!

Connect With Us:



Näita km-ga hindu
Inductive Sensor NJ15S+U1+N, 40x40mm flush, Sn 15mm, NC NAMUR, Sf 150Hz, PBT, -40..100°C, SIL3, 8.2V, IP68, Pepperl+Fuchs
Pilt on illustreeriv
Inductive Sensor NJ15S+U1+N, 40x40mm flush, Sn 15mm, NC NAMUR, Sf 150Hz, PBT, -40..100°C, SIL3, 8.2V, IP68, Pepperl+Fuchs
Kood: 106679
Hind
€ 139,70  /tk
(€ 167,64 /tk KM-ga)
Tootja :
Saadavus:
21 päeva
Kaal:
0.1234 kg
Kogus:
Plus sign Minus sign
 

 

Inductive Sensor NJ15S+U1+N, 40x40mm flush, Sn 15mm, NC NAMUR, Sf 150Hz, PBT, -40..100°C, SIL3, 8.2V, IP68, Pepperl+Fuchs

Inductive sensor NJ15S+U1+N
  • 15 mm flush
  • Usable up to SIL 3 acc. to IEC 61508

Datasheet excerpt: Technical data of NJ15S+U1+N

General specifications
Switching functionNormally closed (NC)
Output typeNAMUR with safety function
Rated operating distance15 mm
Installationflush
Assured operating distance0 ... 12.15 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.85
Output type2-wire
Nominal ratings
Nominal voltage8.2 V (Ri approx. 1 kΩ)
Switching frequency0 ... 150 Hz
Current consumption
Measuring plate not detected≥ 3 mA
Measuring plate detected≤ 1 mA
Functional safety related parameters
MTTFd8110 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
NAMUREN 60947-5-6:2000
IEC 60947-5-6:1999
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection typescrew terminals
Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-sectionup to 2.5 mm2
Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing materialPBT
Sensing facePBT
Degree of protectionIP68
General information
Use in the hazardous areasee instruction manuals
Category1G; 2G; 1D
 
 
Elit OÜ | e-post: elit@elit.ee | +372 622 9119 | 2016 ©


 
X
 
X