|
|
|
Pilt on illustreeriv
|
Remote I/O Module UR20-16DO-P, digital signals, 16-ch., push-in, Weidmüller Kood:
1315250000
Hind (indikatiivne)
€ 169,90
/tk
(€ 207,28 /tk KM-ga)
Tootja
:
Saadavus:
21 päeva
|
Kaal:
0.104 kg/tk
|
Maht:
0.0001 m3/tk
|
|
|
|
|
Remote I/O module UR20-16DO-P, Digital signals, Output, 16ch, Weidmüller
Digital output modules are available in the following variants: 4 DO, 8 DO with 2- and 3-wire technology, 16 DO with or without PLC interface connection. They are mainly used for the incorporation of decentralised actuators. All outputs are designed for DC-13 actuators acc. to DIN EN 60947-5-1 and IEC 61131-2 specifications. As with the digital input modules, frequencies of up to 1 kHz are possible. Protection of the outputs ensures maximum system safety. This consists of an automatic restart following a short-circuit. Clearly visible LEDs signal the status of the entire module as well as the status of individual channels.
In addition to the standard applications of the digital output modules, the range also includes special variants such as the 4RO-SSR module for rapidly switching applications. Fitted with solid state technology, 0.5 A is available here to each output. Furthermore, there is also the 4RO-CO relay module for power-intensive applications. It equipped with four CO contacts, optimised for a switching voltage of 255 V UC and designed for a switching current of 5 A.
|
|
|
Technical data:
|
Dimensions and weights: |
Width: 11.5 mm
Height: 120 mm
Depth: 76 mm
Mounting dimension - height: 128 mm
Weight: 83 g
Net weight: 83 g |
Temperatures:
|
Operating temperature: |
-20°C...+60 °C |
Storage temperature: |
-40 °C...+85 °C |
Digital inputs:
|
Actuator connection: |
Single conductor |
Feedback-free: |
Yes |
Individual channel diagnosis: |
No |
Inductive load (DC13): |
2 Hz |
Lamp load (12 W): |
1 kHz |
Max. output current per channel: |
500 mA |
Max. output current per module: |
8,000 mA |
Max. response time, high: |
100 μs |
Max. response time, low: |
250 μs |
Module diagnosis: |
Yes |
Number: |
16 |
Resistive load (min. 47 Ω): |
1 kHz |
Response time of the protective circuit (current limiting): |
< 100μs |
Short-circuit-proof: |
Yes (thermal cut-out) |
Switch-off energy (inductive): |
< 150 mJ / channel |
Type: |
Ohmic, Inductive, Lamp load |
Connection data:
|
Type of connection: |
PUSH IN |
Wire connection cross section, finely stranded, max.: |
1.5 mm2 |
Wire connection cross-section, finely stranded, min.: |
0.14 mm2 |
Wire cross-section, finely stranded, max. (AWG): |
AWG 16 |
Wire cross-section, finely stranded, min. (AWG): |
AWG 26 |
Wire cross-section, solid, max.: |
1.5 mm2 |
Wire cross-section, solid, max. (AWG): |
AWG 16 |
Wire cross-section, solid, min.: |
0.14 mm2 |
Wire cross-section, solid, min. (AWG): |
AWG 26 |
Power supply:
|
Current consumption from IIN (power segment of the field bus coupler), typ. [mA]: |
8 mA |
Current consumption from IIN (the respective power segment) [mA]: |
20 mA + load |
Supply voltage: |
24 V DC +20%/ -15%, via the system bus |
|
|
File description
|
File type
|
Download link
|
|
|
|
Product data sheet
|
PDF
|
Download link
|
|
|
|
|
|
|