Technical data for design verification |
|
|
|
Rated operational current for specified heat dissipation |
In |
A |
0 |
Heat dissipation per pole, current-dependent |
Pvid |
W |
0 |
Equipment heat dissipation, current-dependent |
Pvid |
W |
0 |
Static heat dissipation, non-current-dependent |
Pvs |
W |
0.5 |
Heat dissipation capacity |
Pdiss |
W |
0 |
Operating ambient temperature min. |
|
°C |
-25 |
Operating ambient temperature max. |
|
°C |
70 |
IEC/EN 61439 design verification |
|
|
|
10.2 Strength of materials and parts |
|
|
|
10.2.2 Corrosion resistance |
|
|
Meets the product standard's requirements. |
10.2.3.1 Verification of thermal stability of enclosures |
|
|
Meets the product standard's requirements. |
10.2.3.2 Verification of resistance of insulating materials to normal heat |
|
|
Meets the product standard's requirements. |
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
|
Meets the product standard's requirements. |
10.2.4 Resistance to ultra-violet (UV) radiation |
|
|
Please enquire |
10.2.5 Lifting |
|
|
Does not apply, since the entire switchgear needs to be evaluated. |
10.2.6 Mechanical impact |
|
|
Does not apply, since the entire switchgear needs to be evaluated. |
10.2.7 Inscriptions |
|
|
Meets the product standard's requirements. |
10.3 Degree of protection of ASSEMBLIES |
|
|
Does not apply, since the entire switchgear needs to be evaluated. |
10.4 Clearances and creepage distances |
|
|
Meets the product standard's requirements. |
10.5 Protection against electric shock |
|
|
Does not apply, since the entire switchgear needs to be evaluated. |
10.6 Incorporation of switching devices and components |
|
|
Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections |
|
|
Is the panel builder's responsibility. |
10.8 Connections for external conductors |
|
|
Is the panel builder's responsibility. |
10.9 Insulation properties |
|
|
|
10.9.2 Power-frequency electric strength |
|
|
Is the panel builder's responsibility. |
10.9.3 Impulse withstand voltage |
|
|
Is the panel builder's responsibility. |
10.9.4 Testing of enclosures made of insulating material |
|
|
Is the panel builder's responsibility. |
10.10 Temperature rise |
|
|
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.11 Short-circuit rating |
|
|
Is the panel builder's responsibility. The specifications for the switchgear must be observed. |
10.12 Electromagnetic compatibility |
|
|
Is the panel builder's responsibility. The specifications for the switchgear must be observed. |
10.13 Mechanical function |
|
|
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |