|
|
Pilt on illustreeriv
|
Sagedusmuundur PowerFlex400, 11kW 22A 3x480VAC, integral keypad, LED display, RS485, frame C, Allen-Bradley Kood:
22C-D022N103
Hind (indikatiivne)
€ 768,40
/tk
(€ 937,45 /tk KM-ga)
Tootja
:
Saadavus:
küsi tarneaega
|
Kaal:
7.3 kg/tk
|
Maht:
0.0266 m3/tk
|
|
|
|
|
AC Drive PowerFlex400, 11kW 22A 3x480VAC, integral keypad?LED display, RS485, frame C, Allen-Bradley
DESCRIPTIONS
-
PowerFlex®400 Air Cooled Drive, Voltage Rating: Input: 308 - 480 V, Output: 480 VAC, Amperage Rating: 22 A, Wattage: 11 KW, Phase: 3 PH, HP Rating: 15 HP, Frame Size: Size C, Frequency Rating: 50/60 HZ, Power Factor: 0.98, Control: RS-485, Mounting: Panel, Display: Integral Keypad And LED, Connection: Fixed Terminal, Enclosure: IP20, Open Type, Environmental Conditions: Altitude: 1000 M (3300 FT) max. without derating. Above 1000 M (3300 FT) derate 3% for every 305 M (1000 FT), Air Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 85 DEG C, Relative Humidity: 0 - 95%, Shock (Operating): 15G Peak For 11 MS Duration, Vibration (Operating): 1G Peak, 5 - 2000 HZ, Dimension: 10.2 IN Height X 5.1 IN Width X 7.1 IN Depth
SPECIFICATIONS
-
-
Item Name: Air Cooled Drive
-
Sub Brand: PowerFlex®400
-
Voltage Rating: Input: 308 - 480 V, Output: 480 VAC
-
Amperage Rating: 22 A
-
Wattage: 11 KW
-
Phase: 3 PH
-
HP Rating: 15 HP
-
Frame Size: Size C
-
Frequency Rating: 50/60 HZ
-
Power Factor: 0.98
-
Control: RS-485
-
Mounting: Panel
-
Display: Integral Keypad And LED
-
Connection: Fixed Terminal
-
Enclosure: IP20, Open Type
-
Environmental Conditions: Altitude: 1000 M (3300 FT) max. without derating. Above 1000 M (3300 FT) derate 3% for every 305 M (1000 FT), Air Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 85 DEG C, Relative Humidity: 0 - 95%, Shock (Operating): 15G Peak For 11 MS Duration, Vibration (Operating): 1G Peak, 5 - 2000 HZ
-
Dimension: 10.2 IN Height X 5.1 IN Width X 7.1 IN Depth
FEATURES
-
- Built in auxiliary motor control
- Operation of up to three (3) line-started motors in addition to the motor controlled directly by the PowerFlex 400 drive
- When auxiliary motor control is enabled, the internal PID controller in the PowerFlex 400 uses a reference and feedback signal to adjust the speed of the drive controlled motor such that the feedback signal follows the reference signal
- The speed of the drive controlled motor is reduced to account for the auxiliary motors additional output to the system
- A motor interlock input identifies motors that are out of service and causes them to skipped over to the next available motor
- AutoSwap function also can be used which allows equal wear to be placed on each motor by periodically swapping the drive controlled and auxiliary motors
- Each motor in the system will over time be connected to the PowerFlex 400 drive and also directly to the AC line
- During an autoswap, the motor directly connected to the PowerFlex 400 drive is stopped and the contactor is opened
- The contactor of the next motor that will be controlled by the PowerFlex 400 drive is opened if running across the AC line
- Without filtered emission class
- Drive has an input which can be wired to a fire control panel or other fire/life safety systems allowing control of the drive to be overridden
- A purge input will start the drive at a programmable purge speed regardless of the selected start source, purge can occur and is operational at any time whether the drive is running or stopped
- A purge command will take precedence over a stop command from the comm port/network and over a “SW Enable” command from the terminal block
- Standards: Listed to UL508C and CAN/CSA-22.2, listed to UL508C for plenums, certified to AS/NZS, 1997 group 1, class A, EMC directive (89/336) EN 61800-3, EN 50081-1, EN 50082-2, EN 50178, EN 60204
|
|
|
|