| General information |
| Product type designation |
AI 4xRTD/TC 2-/3-/4-wire HF |
| Firmware version |
V2.0 |
| ● FW update possible |
Yes |
| usable BaseUnits |
BU type A0, A1 |
| Color code for module-specific color identification plate |
CC00 |
| Product function |
| ● I&M data |
Yes; I&M0 to I&M3 |
| Engineering with |
| ● STEP 7 TIA Portal configurable/integrated as of version |
V12 SP1 / V13 |
| ● STEP 7 configurable/integrated as of version |
V5.5 SP3 / V5.5 SP4 |
| ● PCS 7 configurable/integrated as of version |
V8.1 SP1 |
| ● PROFIBUS as of GSD version/GSD revision |
GSD Revision 5 |
| ● PROFINET as of GSD version/GSD revision |
GSDML V2.3 |
| Operating mode |
| ● Oversampling |
No |
| ● MSI |
No |
| CiR – Configuration in RUN |
| Reparameterization possible in RUN |
Yes |
| Calibration possible in RUN |
Yes |
| Supply voltage |
| Rated value (DC) |
24 V |
| permissible range, lower limit (DC) |
19.2 V |
| permissible range, upper limit (DC) |
28.8 V |
| Reverse polarity protection |
Yes |
| Input current |
| Current consumption, max. |
35 mA |
| Power loss |
| Power loss, typ. |
0.75 W |
| Address area |
| Address space per module |
| ● Address space per module, max. |
8 byte; + 1 byte for QI information |
| Analog inputs |
| Number of analog inputs |
4 |
| ● For voltage measurement |
4 |
| ● For resistance/resistance thermometer measurement |
4 |
| ● For thermocouple measurement |
4 |
| permissible input voltage for voltage input (destruction limit), max. |
30 V |
| Constant measurement current for resistance-type transmitter, typ. |
0.7 mA; 1.7 mA for Cu10 sensors |
| Cycle time (all channels), min. |
Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels); for line compensation in case of a three-wire connection, an additional cycle is necessary |
| Technical unit for temperature measurement adjustable |
Yes; °C/°F/K |
| Input ranges (rated values), voltages |
| ● -1 V to +1 V |
Yes; 16 bit incl. sign |
| ● Input resistance (-1 V to +1 V) |
1 MΩ |
| ● -250 mV to +250 mV |
Yes; 16 bit incl. sign |
| ● Input resistance (-250 mV to +250 mV) |
1 MΩ |
| ● -50 mV to +50 mV |
Yes; 16 bit incl. sign |
| ● Input resistance (-50 mV to +50 mV) |
1 MΩ |
| ● -80 mV to +80 mV |
Yes; 16 bit incl. sign |
| ● Input resistance (-80 mV to +80 mV) |
1 MΩ |
| Input ranges (rated values), thermocouples |
| ● Type B |
Yes; 16 bit incl. sign |
| ● Input resistance (Type B) |
1 MΩ |
| ● Type C |
Yes; 16 bit incl. sign |
| ● Input resistance (Type C) |
1 MΩ |
| ● Type E |
Yes; 16 bit incl. sign |
| ● Input resistance (Type E) |
1 MΩ |
| ● Type J |
Yes; 16 bit incl. sign |
| ● Input resistance (type J) |
1 MΩ |
| ● Type K |
Yes; 16 bit incl. sign |
| ● Input resistance (Type K) |
1 MΩ |
| ● Type L |
Yes; 16 bit incl. sign |
| ● Input resistance (Type L) |
1 MΩ |
| ● Type N |
Yes; 16 bit incl. sign |
| ● Input resistance (Type N) |
1 MΩ |
| ● Type R |
Yes; 16 bit incl. sign |
| ● Input resistance (Type R) |
1 MΩ |
| ● Type S |
Yes; 16 bit incl. sign |
| ● Input resistance (Type S) |
1 MΩ |
| ● Type T |
Yes; 16 bit incl. sign |
| ● Input resistance (Type T) |
1 MΩ |
| ● Type U |
Yes; 16 bit incl. sign |
| ● Input resistance (Type U) |
1 MΩ |
| ● Type TXK/TXK(L) to GOST |
Yes; 16 bit incl. sign |
| ● Input resistance (Type TXK/TXK(L) to GOST) |
1 MΩ |
| Input ranges (rated values), resistance thermometer |
| ● Cu 10 |
Yes; 16 bit incl. sign |
| ● Input resistance (Cu 10) |
1 MΩ |
| ● Ni 100 |
Yes; 16 bit incl. sign |
| ● Input resistance (Ni 100) |
1 MΩ |
| ● Ni 1000 |
Yes; 16 bit incl. sign |
| ● Input resistance (Ni 1000) |
1 MΩ |
| ● LG-Ni 1000 |
Yes; 16 bit incl. sign |
| ● Input resistance (LG-Ni 1000) |
1 MΩ |
| ● Ni 120 |
Yes; 16 bit incl. sign |
| ● Input resistance (Ni 120) |
1 MΩ |
| ● Ni 200 |
Yes; 16 bit incl. sign |
| ● Input resistance (Ni 200) |
1 MΩ |
| ● Ni 500 |
Yes; 16 bit incl. sign |
| ● Input resistance (Ni 500) |
1 MΩ |
| ● Pt 100 |
Yes; 16 bit incl. sign |
| ● Input resistance (Pt 100) |
1 MΩ |
| ● Pt 1000 |
Yes; 16 bit incl. sign |
| ● Input resistance (Pt 1000) |
1 MΩ |
| ● Pt 200 |
Yes; 16 bit incl. sign |
| ● Input resistance (Pt 200) |
1 MΩ |
| ● Pt 500 |
Yes; 16 bit incl. sign |
| ● Input resistance (Pt 500) |
1 MΩ |
| Input ranges (rated values), resistors |
| ● 0 to 150 ohms |
Yes; 15 bit |
| ● Input resistance (0 to 150 ohms) |
1 MΩ |
| ● 0 to 300 ohms |
Yes; 15 bit |
| ● Input resistance (0 to 300 ohms) |
1 MΩ |
| ● 0 to 600 ohms |
Yes; 15 bit |
| ● Input resistance (0 to 600 ohms) |
1 MΩ |
| ● 0 to 3000 ohms |
Yes; 15 bit |
| ● Input resistance (0 to 3000 ohms) |
1 MΩ |
| ● 0 to 6000 ohms |
Yes; 15 bit |
| ● Input resistance (0 to 6000 ohms) |
1 MΩ |
| ● PTC |
Yes; 15 bit |
| ● Input resistance (PTC) |
1 MΩ |
| Thermocouple (TC) |
| Temperature compensation |
| — parameterizable |
Yes |
| — Reference channel of the module |
Yes |
| — internal comparison point |
Yes; with BaseUnit type A1 |
| — Reference channel of the group |
Yes |
| — Number of reference channel groups |
4; Group 0 to 3 |
| — fixed reference temperature |
Yes |
| Cable length |
| ● shielded, max. |
200 m; 50 m with thermocouples |
| Analog value generation for the inputs |
| Measurement principle |
integrating (Sigma-Delta) |
| Integration and conversion time/resolution per channel |
| ● Resolution with overrange (bit including sign), max. |
16 bit |
| ● Integration time, parameterizable |
Yes |
| ● Basic conversion time, including integration time (ms) |
|
| — additional processing time for wire-break check |
2 ms; In the ranges resistance thermometers, resistors and thermocouples |
| — additional power line wire-break check |
2 ms; for 3/4 wire transducer (resistance thermometer and resistor) |
| ● Interference voltage suppression for interference frequency f1 in Hz |
16.6 / 50 / 60 Hz |
| ● Conversion time (per channel) |
180 / 60 / 50 ms |
| Smoothing of measured values |
| ● Number of smoothing levels |
4; None; 4/8/16 times |
| ● parameterizable |
Yes |
| Encoder |
| Connection of signal encoders |
| ● for voltage measurement |
Yes |
| ● for resistance measurement with two-wire connection |
Yes |
| ● for resistance measurement with three-wire connection |
Yes |
| ● for resistance measurement with four-wire connection |
Yes |
| Errors/accuracies |
| Linearity error (relative to input range), (+/-) |
0.01 %; ±0.1 % for resistance thermometers and resistance |
| Temperature error (relative to input range), (+/-) |
0.0009 %/K; ±0.005 % / K at thermocouple |
| Crosstalk between the inputs, min. |
-50 dB |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) |
0.05 % |
| Operational error limit in overall temperature range |
| ● Voltage, relative to input range, (+/-) |
0.1 % |
| ● Resistance, relative to input range, (+/-) |
0.1 % |
| Basic error limit (operational limit at 25 °C) |
| ● Voltage, relative to input range, (+/-) |
0.05 % |
| ● Resistance, relative to input range, (+/-) |
0.05 % |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency |
| ● Series mode interference (peak value of interference < rated value of input range), min. |
70 dB |
| ● Common mode voltage, max. |
10 V |
| ● Common mode interference, min. |
90 dB |
| Isochronous mode |
| Isochronous operation (application synchronized up to terminal) |
No |
| Interrupts/diagnostics/status information |
| Diagnostics function |
Yes |
| Alarms |
| ● Diagnostic alarm |
Yes |
| ● Limit value alarm |
Yes; two upper and two lower limit values in each case |
| Diagnostic messages |
| ● Monitoring the supply voltage |
Yes |
| ● Wire-break |
Yes; channel by channel |
| ● Group error |
Yes |
| ● Overflow/underflow |
Yes; channel by channel |
| Diagnostics indication LED |
| ● Monitoring of the supply voltage (PWR-LED) |
Yes; Green PWR LED |
| ● Channel status display |
Yes; Green LED |
| ● for channel diagnostics |
Yes; Red LED |
| ● for module diagnostics |
Yes; green/red DIAG LED |
| Potential separation |
| Potential separation channels |
| ● between the channels |
No |
| ● between the channels and backplane bus |
Yes |
| ● between the channels and the power supply of the electronics |
Yes |
| Permissible potential difference |
| between the inputs (UCM) |
10 V DC |
| Isolation |
| Isolation tested with |
707 V DC (type test) |
| Dimensions |
| Width |
15 mm |
| Height |
73 mm |
| Depth |
58 mm |
| Weights |
| Weight, approx. |
30 g |
| last modified: |
06/07/2019 |
