e-Elit - juhtiv
elektri- ja automaatikatarvikute
online hulgimüük

Klienditeenindus E-R 9-17
Helista: +372 622 9119

	Tooteid:	Maksumus:
	0	€ 0,00

Logi sisse

Näita kõiki kategooriaid

Ei leidnud sobilikku toodet?

Head pakkumised!

AC Drive PowerFlex700, 2.2kW 5A 3x400VAC, brake IGBT, EMC, VC 24V I/O, frame 0, Allen-Bradley

Connect With Us:

Tootepuu > Paigaldustarvikud > Valgustid > LED toiteplokid ^dimmerid ^akuseadmed

Pilt on illustreeriv

LED toiteplokk LPH, input 180..264VAC| 254..370VDC, 18W 1.5A 12VDC, -30..70°C, cl.2, IP67, Mean Well

Kood: LPH-18-12

Hind

€ 8,90 /tk
(€ 10,68 /tk KM-ga)

Tootja :

MEAN WELL Enterprises Co., Ltd.

Saadavus:

Laos

Kaal:

0.19 kg

Maht:

0.0001 m3

Pakendi kogus:

5tk

LED toiteplokk 18W 1,5A 12V IP67

Features
180-264VAC input only
Fully encapsulated with IP67 level (Note.5)
Protections: Short circuit / Over load / Over voltage / Over temperature
Cooling by free air convection
Class II power unit, no FG
Pass LPS
100% full load burn-in test
Suitable for LED lightning and moving sign applications
High reliability / Low cost
2 years warranty

LED strip

OUTPUT DC Voltage	12V
Rated current	1.25A
Current range	0 ~1.5A
Rated power	18W
Ripple & Noise (max.) Note.2	120mVp-p
Voltage tolerance Note.3	±3.0%
Line regulation	±1.0%
Load regulation	±2.0%
Setup, rise time Note.6	1500ms, 30ms/ 230VAC
Hold up time (typ.)	50ms/230VAC at full load

INPUT Voltage range	180 ~ 264VAC 254~370VDC
Frequency range	47 ~ 63 Hz
Effiency (typ.)	80%
AC current	0.3A/230VAC
Inrush current (max.)	Cold start 50A (width=155µs measured at 50% lpeak) at 230VAC
Leakage current	0.25mA/240VAC

PROTECTION Over load	Above 105% Protection type: Hiccup mode, recovers automatically after fault conditions is removed
Over voltage	13.8 ~ 16.2V Protection type: Shut off o/p voltage, clamping by zener diode

ENVIRONMENT Working temperature	-30° ~ +70°C (Refer to "Derating Curve")
Working humidity	20 ~ 90% RH non-condensing
Storage temp., humidity	-40 ~ +80°C, 10 ~ 90% RH
Temp. coefficient	±0.03%/°C (0 ~ 50°C)
Vibration	10 ~ 500Hz, 2G 10 min./1 cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC Safety standards	TUV EN60950-1, TUV EN61347-1, EN61347-2-13, IP67 approved; design refer to UL1310 Class 2, CAN/CSA No. 223-M91
Withstand voltage	I/P-O/P: 3KVAC
Isolation resistance	I/P-O/P: &100M Ohms / 500VDC / 25°C / 70% RH
EMC emission	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3
EMC immunity	Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; EN55024, light industry level, criteria A
OTHERS MTBF	1200.6K hrs min. MIL-HDBK-217F (25°C)
Dimension	140 x 30 x 22 (L x W x H)
Packing	0.175kg; 70pcs / 13.3kg / 0.71CUFT
NOTE	All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12“ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance: includes set up tolerance, line regulation and load regulation. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-quality EMC Directive on the complete installation again. Length of the set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. The unit might not be suitable for lighting applications in EU countries. please check with your local authorities for the possible use of the unit.