|
|
|
|
Pilt on illustreeriv
|
LED toiteplokk LPV, input 90..264VAC| 127..370VDC, 60W 5A 12VDC, -30..70°C, cl.2, IP67, Mean Well Kood:
LPV-60-12
Hind
€ 18,70
/tk
(€ 22,44 /tk KM-ga)
Tootja
:
|
Saadavus:
Laos
|
Kaal:
0.4313 kg
|
Maht:
0.0002 m3
|
Pakendi kogus:
5tk
|
|
|
|
LED toiteplokk 60W 5A 12V IP67
Features
Constant voltage design
Universal AC input / Full range
Withstand 300 VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Fully encapsulated with IP67 level
Fully isolated plastic case
Class II power unit, no FG
Class 2 power unit
Pass LPS
Suitable for LED lightning and moving sign applications
100% full load burn-in test
Low cost, high reliability
2 years warranty
|
OUTPUT
DC Voltage |
12V |
| Rated current |
5A |
| Current range |
0 ~5A |
| Rated power |
60W |
| Ripple & Noise (max.) Note.2 |
120mVp-p |
| Voltage tolerance Note.3 |
±5.0% |
| Line regulation |
±1.0% |
| Load regulation |
±2.0% |
| Setup, rise time Note.6 |
500ms, 20ms/ 230VAC 500ms, 20ms / 115 VAC at full load |
| Hold up time (typ.) |
50ms/230VAC 16ms/115VAC at full load |
| |
|
INPUT
Voltage range |
90 ~ 264VAC 127~370VDC |
| Frequency range |
47 ~ 63 Hz |
| Effiency (typ.) |
83% |
| AC current |
1.2A/115VAC 1/230VAC |
| Inrush current (max.) |
Cold start 60A (width=525µs measured at 50% lpeak) at 230VAC |
| Leakage current |
0.25mA/240VAC |
| |
|
PROTECTION
OVERLOAD |
110 ~ 150 %#37; rated output power
Protection type: Hiccup mode, recovers automatically after fault conditions is removed |
| Over voltage |
13.8 ~ 16.2V
Protection type: Shut off o/p voltage, re-power on to recover |
| |
|
ENVIRONMENT
Working temperature |
-30° ~ +70°C (Refer to "Derating Curve") |
| Working humidity |
20 ~ 90% RH non-condensing |
| Storage temp., humidity |
-40 ~ +80°C, 10 ~ 95% RH |
| Temp. coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10 min./1 cycle, period for 60min. each along X, Y, Z axes |
SAFETY & EMC
Safety standards |
UL879 (except for LPV-60-5), UL1310 (except for LPV-60-5), CSA C22.2 No. 207-M89 (except for LPV-60-5, LPV-60-48),
CAN/CSA C22.2 No. 223-M91 (except for LPV-60-5, LPV-60-48), IP67 approved; design refer to TUV EN60950-1 |
| Withstand voltage |
I/P-O/P: 3KVAC |
| Isolation resistance |
I/P-O/P: &100M Ohms / 500VDC / 25°C / 70% RH |
| EMC emission |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 |
| EMC immunity |
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; EN55024, light industry level, criteria A |
OTHERS
MTBF |
732K hrs min. MIL-HDBK-217F (25°C) |
| Dimension |
162.5 x 42.5 x 32 (L x W x H) |
| Packing |
0.4kg; 32pcs / 13.8kg / 0.56CUFT |
NOTE |
- All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12“ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- Tolerance: includes set up tolerance, line regulation and load regulation.
- The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation,
the final equipment manufacturers must re-quality EMC Directive on the complete installation again.
- Length of the set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
- The unit might not be suitable for lighting applications in EU countries. please check with your local authorities for the possible use of the unit.
|
|
File description
|
File type
|
Download link
|
|
|
|
|
|
Product data sheet
|
PDF
|
Download link
|
|
|
|
|
|
