Switched-Mode Power Supply Performance, input 1x 100..240VAC/110..150VDC, output 480W 20A 24..28VDC, TS35, Allen-Bradley

Power Supply, Type: 1606-XLS Series, Switched Mode, Performance, Input Voltage: 100 - 240 VAC/110 - 150 VDC, Phase: 1 PH, Output Voltage: 24 - 28 VDC, Output Current: 20 A At 24 V And 17 A At 28 V, Output Power: 480 W, Frequency Rating: 47 - 63 HZ, Input Current: 4.6 A At 100 VAC/2.5 A At 240 VAC, Fuse Rating: 10 A Slow Blow Fuse, Material: Plastic, Efficiency: 92.4% Typical, Mounting: DIN Rail, Cable Size: Power Terminal: 20 - 10 AWG, DC-OK-Signal Terminal: 26 - 12 AWG, Environmental Conditions: Operating Temperature: -25 To 70 DEG C, Storage And Transport Temperature: -40 To 85 DEG C, Humidity: 5 - 95% RH, Length: 127 MM, Width: 84 MM, Height: 124 MM, Wire Strip Length: Power Terminal: 10 MM, Signal Terminal: 6 MM, Hold-Up Time: 32 - 51 MS

• Item Name: Power Supply

• Type: 1606-XLS Series, Switched Mode, Performance

• Input Voltage: 100 - 240 VAC/110 - 150 VDC

• Phase: 1 PH

• Output Voltage: 24 - 28 VDC

• Output Current: 20 A At 24 V And 17 A At 28 V

• Output Power: 480 W

• Frequency Rating: 47 - 63 HZ

• Input Current: 4.6 A At 100 VAC/2.5 A At 240 VAC

• Fuse Rating: 10 A Slow Blow Fuse

• Material: Plastic

• Efficiency: 92.4% Typical

• Mounting: DIN Rail

• Cable Size: Power Terminal: 20 - 10 AWG, DC-OK-Signal Terminal: 26 - 12 AWG

• Environmental Conditions: Operating Temperature: -25 To 70 DEG C, Storage And Transport Temperature: -40 To 85 DEG C, Humidity: 5 - 95% RH

• Length: 127 MM

• Width: 84 MM

• Height: 124 MM

• Hold-Up Time: 32 - 51 MS

• Wire Strip Length: Power Terminal: 10 MM, Signal Terminal: 6 MM

Bulletin 1606 switched mode power supplies includes four product families that meet most worldwide single and three-phase application requirements. These units are designed and manufactured to accept wide ranges of both AC and DC input voltages and are tested to meet global safety standards.

• Building on the successful design of its predecessors, the XLS line couples a new technology that significantly reduces unit size yet delivers a 150% power boost
• Sleek and compact, these highly efficient devices have enough reserve current available to start even your most stubborn loads
• 150% power boost feature handles start-up loads
• Buffer modules provide a short boost function, buffering load currents during typical main faults, switching events or load peaks
• Ultra-small size
• Extra-low inrush current
• Active power factor correction
• Superior efficiency and temperature rating
• Ripple/noise: less than 100 MV (peak to peak)
• MTBF: greater than 469000 HR
• Standards: UL 508 listed, C/US RU UL 60950-1 listed, C/US RU listed Class I Div 2, C/US CSA number 182790 certified, CE certified