e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	€0.00

Show all products categ.

Need assistance?

Analog Current Input Module, 4-ch. 24VDC, high density, Rockwell Automation

Bulletin 1734 POINT I/O™ is ideal for applications requiring flexibility and low cost of ownership. Granularity of one to eight points lets you buy only the I/O you need. The compact design makes installation easier in limited panel space. The family includes POINT Guard I/O™ safety-rated I/O modules that can be used side-by-side in a standard POINT I/O system
Cost savings: Modular design requires less enclosure space
Up to 504 channels on a single network interface
Removable terminations accelerate commissioning
Remove and Insert Under Power reduces maintenance time
Local autonomous control
Fast, simple configuration and integration
Full Add-on-Profiles in RSLogix 5000, no other software is needed
Channel-level diagnostics
Greater flexibility
Local control
Controlled by a single GuardLogix controller
Signed integer data
Sigma delta input conversion
Standards: CE-ATEX marked, CE-EMC marked, C-TICK certified, GOST_R certified, KCC certified, MARINE-GL certified, ROSTECHNADZOR, UL-CA listed, UL-CA_HAZ listed, UL-US listed, UL-US_HAZ listed
Applications: For use with ControlLogix controller

Item Name: Analog High Density Current Input Module
Sub Brand: Point I/O™
Number Of Channels: 4 (Single-Ended, Non-Isolated)
Input: Nominal: 24 VDC, 0 - 20 MA, 4 - 20 MA
Isolation: 50 V (Continuous)
Enclosure: Open Type
Mounting: DIN Rail
Length: 0.47 IN
Width: 2.21 IN
Height: 2.97 IN
Temperature Rating: -20 To 55 DEG C
Environmental Conditions: Relative Humidity: 5 - 95% Noncondensing, Shock: 30 G Operating, 50 G Nonoperating, Vibration: 5 G At 10 - 500 HZ
Accuracy: 0.1 % Full Scale At 25 DEG C
Power Dissipation: 0.6 W At 28.8 VDC
Indicator: 1 Green/Red- Module Status Indicator, Logic side, 1 Green/Red Network Status Indicator, Logic side, 4 Green/Red Input Status Indicator, Logic side
Resolution: 16 Bits Over 21 MA
Impedance: 60 OHM
Bus Rating: 75 MA At 5 VDC
Input Step Response: Notch: 50 MS At 60 HZ, 6.25 MS At 480 HZ
Rejection Ratio: Common Mode: 120 DB, Normal Mode: 60 DB

Point I/O™ Analog High Density Current Input Module, Number Of Channels: 4 (Single-Ended, Non-Isolated), Input: Nominal: 24 VDC, 0 - 20 MA, 4 - 20 MA, Isolation: 50 V (Continuous), Enclosure: Open Type, Mounting: DIN Rail, Length: 0.47 IN, Width: 2.21 IN, Height: 2.97 IN, Temperature Rating: -20 To 55 DEG C, Environmental Conditions: Relative Humidity: 5 - 95% Noncondensing, Shock: 30 G Operating, 50 G Nonoperating, Vibration: 5 G At 10 - 500 HZ, Accuracy: 0.1 % Full Scale At 25 DEG C, Power Dissipation: 0.6 W At 28.8 VDC, Impedance: 60 OHM, Input Step Response: Notch: 50 MS At 60 HZ, 6.25 MS At 480 HZ, Rejection Ratio: Common Mode: 120 DB, Normal Mode: 60 DB, Indicator: 1 Green/Red- Module Status Indicator, Logic side, 1 Green/Red Network Status Indicator, Logic side, 4 Green/Red Input Status Indicator, Logic side, Bus Rating: 75 MA At 5 VDC, Resolution: 16 Bits Over 21 MA, Standard/Approvals: CE-ATEX marked, CE-EMC marked, C-TICK certified, GOST_R certified, KCC certified, MARINE-GL certified, ROSTECHNADZOR, UL-CA listed, UL-CA_HAZ listed, UL-US listed, UL-US_HAZ listed, Application: For use with ControlLogix controller