e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	€0.00

Show all products categ.

Need assistance?

Digital Input Module MicroLogix1200, 8 inputs 24VDC sink/source, Allen-Bradley

DESCRIPTIONS
MicroLogix™ Digital Input Module, Type: Discrete, Number Of Channels: 8 (Isolated), Input: Off-State Voltage: 5 VDC, Off-State Current: 1.5 MA, On-State Voltage: 10 VDC, On-State Current: 12 MA (Maximum) At 30 VDC, Voltage Rating: 10 - 30 VDC At 30 DEG C, 10 - 26.4 VDC At 55 DEG C, Current Rating: Inrush: 250 MA, Isolation: Verified By One Of The Following Dielectric Tests: 1200 VAC For 1 SEC Or 1697 VDC For 1 SEC, 75 VDC Working Voltage (IEC Class 2 Reinforced Insulation), Enclosure: IP20, Rfi Suppression: Radiated: 10 V/M, 80 - 1000 MHZ, 80% Amplitude Modulation, 900 MHZ Keyed Carrier, Conducted: 10 V, 0.15 - 80 MHZ, Mounting: DIN Rail, Panel, Length: 1.575 IN, Width: 3.425 IN, Height: 3.543 IN, Temperature Rating: -32 To 131 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration Operating: 5 G At 10 - 500 HZ, 0.030 IN Maximum Peak-To-Peak, Shock Operating: 30 G Panel Mounted, Response Time: Signal Delay - On Delay: 8 MS, Off Delay: 8 MS, Power Dissipation: Heat Dissipation: 3.7 W, Output Type: Current Sinking/Source, Impedance: Nominal: 3 KOHM, Surge Transient Immunity: 2 KV Common Mode, 1 KV Differential Mode, Bus Rating: Bus Current Draw: 50 MA At 5 VDC (0.25 W), Indicator: LED, Standard/Approvals: C/US UL listed, UL 508, UL 1604, CSA C22.2, file number 213, CE marked, class I, division 2, hazardous location, groups A, B, C, D, C-tick, GOST_R, KCC certified, marine-ABS, marine-BVS, marine-DNV, marine-GL, marine-KRS, marine-LR, ROSTECHNADZOR

SPECIFICATIONS

Item Name: Digital Input Module
Type: Discrete
Sub Brand: MicroLogix™
Number Of Channels: 8 (Isolated)
Input: Off-State Voltage: 5 VDC, Off-State Current: 1.5 MA, On-State Voltage: 10 VDC, On-State Current: 12 MA (Maximum) At 30 VDC
Voltage Rating: 10 - 30 VDC At 30 DEG C, 10 - 26.4 VDC At 55 DEG C
Current Rating: Inrush: 250 MA
Isolation: Verified By One Of The Following Dielectric Tests: 1200 VAC For 1 SEC Or 1697 VDC For 1 SEC, 75 VDC Working Voltage (IEC Class 2 Reinforced Insulation)
Enclosure: IP20
Rfi Suppression: Radiated: 10 V/M, 80 - 1000 MHZ, 80% Amplitude Modulation, 900 MHZ Keyed Carrier, Conducted: 10 V, 0.15 - 80 MHZ
Mounting: DIN Rail, Panel
Length: 1.575 IN
Width: 3.425 IN
Height: 3.543 IN
Temperature Rating: -32 To 131 DEG F
Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration Operating: 5 G At 10 - 500 HZ, 0.030 IN Maximum Peak-To-Peak, Shock Operating: 30 G Panel Mounted
Response Time: Signal Delay - On Delay: 8 MS, Off Delay: 8 MS
Power Dissipation: Heat Dissipation: 3.7 W
Output Type: Current Sinking/Source
Indicator: LED
Surge Transient Immunity: 2 KV Common Mode, 1 KV Differential Mode
Impedance: Nominal: 3 KOHM
Bus Rating: Bus Current Draw: 50 MA At 5 VDC (0.25 W)

FEATURES
The 1762 MicroLogix expansion I/O modules are compatible with MicroLogix 1100, MicroLogix 1200, and MicroLogix 1400 controllers. Install the expansion I/O modules to the right of the controller, either on a panel with two mounting screws or on a DIN rail. Use digital I/O modules in many combinations, up to the maximum supported by the controller. The current loading capacity of the controller’s built-in power supply may limit the actual number of I/O modules that can be connected to the controller.
Integrated high-performance I/O bus
Software keying to prevent incorrect positioning within the system
Finger-safe terminal blocks for I/O wiring
Label to record I/O terminal designations
Network support includes EtherNet/IP, DeviceNet, and DH-485 (local only)
Standards: C/US UL listed, UL 508, UL 1604, CSA C22.2, file number 213, CE marked, class I, division 2, hazardous location, groups A, B, C, D, C-tick, GOST_R, KCC certified, marine-ABS, marine-BVS, marine-DNV, marine-GL, marine-KRS, marine-LR, ROSTECHNADZOR