| SIMATIC PM 1507 24 V/3 A Stabilized power supply for SIMATIC S7-1500 input: 120/230 V AC, output: 24 V DC/3 A |
| Input |
| Input |
1-phase AC |
| Supply voltage |
|
| ● 1 at AC Rated value |
120 V |
| ● 2 at AC Rated value |
230 V |
| ● Note |
Automatic range selection |
| Input voltage |
|
| ● 1 at AC |
85 ... 132 V |
| ● 2 at AC |
170 ... 264 V |
| Wide-range input |
No |
| Overvoltage resistance |
2.3 × Vin rated, 1.3 ms |
| Mains buffering at Iout rated, min. |
20 ms; at Vin = 93/187 V |
| Rated line frequency 1 |
50 Hz |
| Rated line frequency 2 |
60 Hz |
| Rated line range |
45 ... 65 Hz |
| Input current |
|
| ● at rated input voltage 120 V |
1.4 A |
| ● at rated input voltage 230 V |
0.8 A |
| Switch-on current limiting (+25 °C), max. |
23 A |
| Duration of inrush current limiting at 25 °C |
|
| ● maximum |
3 ms |
| I²t, max. |
1.3 A²·s |
| Built-in incoming fuse |
T 3,15 A/250 V (not accessible) |
| Protection in the mains power input (IEC 898) |
Recommended miniature circuit breaker: 10 A characteristic B or 6 A characteristic C |
| Output |
| Output |
Controlled, isolated DC voltage |
| Rated voltage Vout DC |
24 V |
| Total tolerance, static ± |
1 % |
| Static mains compensation, approx. |
0.1 % |
| Static load balancing, approx. |
0.1 % |
| Residual ripple peak-peak, max. |
50 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) |
150 mV |
| Product function Output voltage adjustable |
No |
| Status display |
LED green for 24 V OK; LED red for error; LED yellow for stand-by |
| On/off behavior |
No overshoot of Vout (soft start) |
| Startup delay, max. |
1.5 s |
| Voltage rise, typ. |
10 ms |
| Rated current value Iout rated |
3 A |
| Current range |
0 ... 3 A |
| Supplied active power typical |
72 W |
| Short-term overload current |
|
| ● on short-circuiting during the start-up typical |
12 A |
| ● at short-circuit during operation typical |
12 A |
| Duration of overloading capability for excess current |
|
| ● on short-circuiting during the start-up |
70 ms |
| ● at short-circuit during operation |
70 ms |
| Parallel switching for enhanced performance |
No |
| Efficiency |
| Efficiency at Vout rated, Iout rated, approx. |
87 % |
| Power loss at Vout rated, Iout rated, approx. |
11 W |
| Closed-loop control |
| Dynamic mains compensation (Vin rated ±15 %), max. |
0.1 % |
| Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. |
1 % |
| Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. |
3 % |
| Load step setting time 10 to 90%, typ. |
5 ms |
| Load step setting time 90 to 10%, typ. |
5 ms |
| Setting time maximum |
5 ms |
| Protection and monitoring |
| Output overvoltage protection |
Additional control loop, limitation (closed loop control) at < 28.8 V |
| Current limitation |
3.15 ... 3.6 A |
| Current limitation, typ. |
3.4 A |
| Property of the output Short-circuit proof |
Yes |
| Short-circuit protection |
Electronic shutdown, automatic restart |
| Overload/short-circuit indicator |
- |
| Safety |
| Primary/secondary isolation |
Yes |
| Galvanic isolation |
Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2 |
| Protection class |
Class I |
| Leakage current |
|
| ● maximum |
3.5 mA |
| ● typical |
0.4 mA |
| CE mark |
Yes |
| UL/cUL (CSA) approval |
cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289 |
| Explosion protection |
IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455 |
| FM approval |
Class I, Div. 2, Group ABCD, T4 |
| CB approval |
Yes |
| Marine approval |
ABS, BV, DNV GL |
| Degree of protection (EN 60529) |
IP20 |
| EMC |
| Emitted interference |
EN 55022 Class B |
| Supply harmonics limitation |
EN 61000-3-2 |
| Noise immunity |
EN 61000-6-2 |
| Operating data |
| Ambient temperature |
|
| ● during operation |
0 ... 60 °C |
| — Note |
with natural convection |
| ● during transport |
-40 ... +85 °C |
| ● during storage |
-40 ... +85 °C |
| Humidity class according to EN 60721 |
Climate class 3K3, no condensation |
| Mechanics |
| Connection technology |
Screw-/spring clamp connection |
| Connections |
|
| ● Supply input |
L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² |
| ● Output |
L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm² |
| Product function |
|
| ● removable terminal at input |
Yes |
| ● removable terminal at output |
Yes |
| Width of the enclosure |
50 mm |
| Height of the enclosure |
147 mm |
| Depth of the enclosure |
129 mm |
| Required spacing |
|
| ● top |
50 mm |
| ● bottom |
50 mm |
| ● left |
0 mm |
| ● right |
0 mm |
| Weight, approx. |
0.45 kg |
| Product feature of the enclosure housing for side-by-side mounting |
Yes |
| Installation |
Can be mounted onto S7-1500 rail |
| MTBF at 40 °C |
1 611 993 h |
| Other information |
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
|
|
